This guide will take you through changing the IP address on your computer. This can be needed when configuring IP cameras or certain network devices like the wireless bridges which we sell. 


Configuring the Ethernet Settings on Your Computer


Click on the Windows icon and type Ethernet, select change adaptor settings from the list and then click on “Change adaptor options” on the right. 


Double click on the “Ethernet” icon which shows up and then click on “Properties”.  


Select the “Internet Protocol Version 4 (TCIP/IPv4)” and click on “Properties”.  



Now change to “Use the following IP address” which you will want to fill in with the relevant information for the device you are setting up. 



Here are a few examples of settings you may want to input:


Comfast Bridge

  • IP Address 192.168.10.20
  • Subnet mask: 255.255.255.0


EnGenius Bridge

  • IP Address 192.168.1.20
  • Subnet mask: 255.255.255.0


Hikvision IP Camera

  • IP Address 192.168.1.20
  • Subnet mask: 255.255.255.0


Gamut IP Camera

  • IP Address 192.168.1.20
  • Subnet mask: 255.255.255.0

 

You can now press ok and then ok again to save the settings which will have everything configured for you as needed.