This guide will take you through the steps required to set a camera up to record onto an SD card for our WiFi Bird Box camera.


Before you get started

  • Make sure your camera is powered on and connected to your router.
  • Make sure your camera is viewable on your computer


Setting up recording to an SD card

On the main screen click onto the Device Config option under Config Manager.


Now select Disk Manager under Onboard Storage and check it is recognising the SD card. Select the SD card from the list and press the format button off the right.


Click OK and then go to Record Config, Select the Auto mode and tick just the detect box for motion detection. If you want continuous recording tick the general box.


Adjust the time period on the left for the time period you want the camera to record.


Press OK once done to save the settings.

 

Should you need any more help please don’t hesitate to get in touch with our helpdesk.